Features

Provides connection between EDT's S11W, S16D, SCD-20, or SCD-40 and External Device
Precision impedance twisted pairs
High performance double shielded
Effectiveness greater than 60dB to 1 GHz
UL List Type CL2
7, 25 and 50 foot lengths
Customized features available

Description

The cable assemblies provide a highly reliable and durable connection between the EDT parallel interface card and an external device. The cable assemblies allow faster transmission speeds, lower propagation delay and better controlled impedance than standard multi-pair cables. The cable is UL listed 28 AWG 7/36 tinned copper conductor, surrounded by a polyolefin insulation and PBC jacket. The 80 pin high density end mates with the EDT SllW, S16D, SCD-20 and SCD-40.

Custom Cables

Custom cables are available from specifications provided by the customer. A one time set-up fee is charged on the initial order. Consult factory for custom cable assemblies and adapters needed to meet different requirements.

Order Number and Dimensions

Specifications

Impedance-ohms

Capacitance (Max)

Conductor to Conductor: 14 pf/ft

Propagation Delay

Conductor DC-Resistance

@ 20░ C Max: 70 Ohms/1,000 ft

Attenuation

@ 50 Mhz: .085 db/ft Max

Connectors

80-pin: AMP 2 x 40 50-mil pitch connector 749111-7

Cable Assemblies

For the S11W, S16D, SCD-20 and SCD-40 Interface Cards

CAB-A Cable Series

High Density 80-pin connector on one end and twin 40-pin connectors on the other end
Used to connect EDT interface card with an external device
Used with S11W and S16D cards

CAB-B Cable Series

High Density 80-pin connectors on both ends
Signals are swapped end to end
Used to connect two S11W or two S16D cards, or in applications where the external device has an 80-pin connector

CAB-D Cable Series

Same as CAB-B except signals are straight through
Used with S11W and S16D

CAB-J Cable Series

Same as CAB-A with pull tabs replacing shielded backshells
Used with S11W and S16D

CAB-AA Cable Series

Same as CAB-A except used with SCD-20 and SCD-40

CAB-BB Cable Series

Same as CAB-B except used to connect two SCD cards

CAB-DD Cable Series

Same as CAB-D except available signals are straight through

CAB-SS Cable Series

High Density 80-pin connector to four DB25 connectors for RS-422
Used with SCD-20 and SCD-40 cards

Loopback Diagnostic Kit

LBK-A Loopback Diagnostics Kit

Includes one high density 80-pin loopback connector and one twin 40-pin cable loopback connector
Provides board and cable diagnostic testing when used with diagnostics software included on driver diskette
Loops S11W or S16D ouputs to inputs
Aids in the user's configuration of S11W or S16D interface cards
For use with CAB-A and CAB-J

LBK-B Loopback Diagnostics Kit

Same as LBK-A except includes two high density 80-pin loopback connectors
High-density 80 pin connectors on both ends
For use with CAB-B and CAB-D

Comments about this web page? Send e-mail to webmaster@edt.com